Reroll
& Strip
 |
| Products
That Protect |
| Anodes-
Sputtering Targets |
| Grounding
Mats & Ribbons |
| Metallized
Wires |
| |
| Non-Ferrous
Mill Products |
| Strips
- |
| - |
Zinc
Based Alloys |
| - |
98Zn/2AI 85Zn/15AI |
| Other
Specials |
|
Platt
Brothers Nonferrous Mill Facility
Over 130,000 square feet of manufacturing space
devoted to the manufacture of zinc-based alloys
in malleable forms of rod, wire, strip and shapes.
NON-FERROUS ALLOYING ON THE PREMISES
While most expertise is in Zinc-based alloys,
other unusual non-ferrous alloys can be melted
and cast. These castings can be then experimentally
rolled, drawn, shaped, slit and otherwise machined
into the shape required. For instance, we process
alloys that melt at specific low temperature ranges,
creating the necessary fusible link desired.
MELTING OF ZINC-BASED ALLOYS
Our furnaces hold molten metal around the clock,
around the year. The varied nature of our product
mix demands greet flexibility in our casting and
alloying schedules.
CASTING METHODS
Most metals are continuously cast, using proprietary
machinery as well as Properzi and Hazelett machinery.
In addition we static cast into 250# billets,
and use book and bullet molds for the small or
special metal lots.
SLITTING
AND CUT-TO LENGTH PIECES - Slitting capacity
in coils to 12' wide and down to .062" wide.
Coil OD's to 30". Arbor sizes 2", 4"
5" and 10" diameters. Cut-to-length
pieces up to 146" long.
PACKAGING - We make our own shipping
containers to assure that your metal is packaged
safely and will be processed in your machines.
Special packaging such as spools for "tender"
metals, export boxing, and container "stuffing"
is done on our premises.
Kan Ban and Just-In Time programs are used whenever
small annual volumes, in smaller monthly usage
are required. These "pulls" are stored
in our warehouse ready for shipment in days from
receipt of your release.
Reroll
and Strip Continued>
E-mail:
zincstrip@plattbros.com
|
