|
Thermal
Spray Metalizing
Platt
Brothers manufactures both zinc and zinc/aluminum
wire used primarily in the thermal spray process.
Wire
Diameters
are:.057" .064" .079" .091"
.125" .1875"
Packaging
is available in coils, continuous wire payoffpack
drums, and spools.
Finishing
is available as either bright or lubricated finishes
depending upon the thermal spray equipment used.
Same day shipping
service can be provided from either our headquarters
in Waterbury, Connecticut or our Little Rock,
Arkansas warehouse, depending upon available stock
and destination.
Pure
Zinc Wire:
Plattzinc zinc wire is 99.99% pure zinc wire.
A pure zinc wire coating offers atmospheric protection
to steel superior to conventional paint coatings
by three basic forms:
| 1. |
Barrier
protection |
| 2. |
Formation
of zinc corrosion products that protect both
the coating and the steel from the environment. |
| 3. |
Galvanic
action; the zinc coating corrodes in preference
to the steel. |
Melting
Point:
787.0 Bond Strength: 1000 psi Max. Service Temp
: 140
VOC: 0 Coating Coverage per pound @ 6 mils: 3.5
sq. ft./lbs.
85/15 Zinc/Aluminum Wire:
Plattzinc 85/15 wire is an alloy of 85% zinc and
15% aluminum by weight. When sprayed onto steel,
the alloy produces a coating with the best characteristics
of both metals for optimum corrosion protection.
This alloy is especially effective on steel against
sodium chloride(salt), sulfur dioxide and marine
environments.
Melting
Point:
824.0 Bond Strength: 800-1000 psi Max. Service
Temp. 600
VOC: 0 Coating Coverage per pound @ 6 mils: 4.3
sq. ft./lbs.
E-mail:
thermalspraying@plattbros.com
|
